R-4013

Pictures

WARDJet´s R-4013 is a workhorse that allows multiple, large sheets of material to be loaded and cut at the same time.

All R-Series waterjets use the same crossbeam used on the Z-Series systems, allowing multiple carriages and cutting heads to be placed at any position on the table quickly and easily. Also, by having an extra foot of space on our crossbeam beyond the standard 12´ of travel, we have created room for a second Z carriage to be parked when not in use, while still allowing the remaining head to have a full 12´ of travel.

Loading and unloading the R-Series is simple and practical as the entire carriage moves out of the way, leaving the stand-alone tank fully accessible from 3 sides. Hence it is just as easy to load from the front or back of the tank, again contributing to the flexibility the R-Series offers.

The R-4013 comes with all the fantastic features that are standard with any R-Series machine, including the freedom to choose which type or combination of grating and clamping system you want from our options. The chart below is used as a sample for all of the R-Series machines.


Following are the statistics for a standard R-4013:

Machine Dimensions Footprint 175.00" x 167.00" Gantry Only
Depth of tank 35"
Cutting Envelope X-Y Travel 145" x 145" with one carriage
145" x 156" with two carriages
Software Advanced CAD/Cam Software Installed on customer's personal computer
Controller Power Requirements X-Classic & XL 220V 30amps
Burny LCD-10 120V, 20 amps
Air Requirements Minimum 40 psi for bulk feed hopper
  Minimum 20 psi for mini-hopper
  Minimum 80-90 psi for cutting heads
Number of Z-Carriages Maximum 7+
Mini Hopper One WARDJet Inc. patented mini-hopper per cutting head
Bulk Feed Hopper 1100 lb pressurized standard
Drive Mechanism Y-axis beam is ball screw driven
X-axis are helical rack and split pinion driven
Tolerances Linear positional accuracy: +/- 0.010" per axis
Repeatability: ± 0.005" per axis
Speed From 0.1 ipm up to 500 ipm