|
Used Waterjet Cutting Machines
(#214349)
|
Z-613
- Gantry: WARDJet 6' x 13' Z-Series
- Year of Manufacture: 2007
- Pump: Used 50 HP Intensifier Pump
- Cutting Heads: 1
- Controller: Burny LCD-10 Controller
- Hours: 1400
- Price: Call 330-677-9100 for pricing
|
(#214339)
|
Flow Bengal 4x4 & 7x 60hp Pump
- Gantry: Flow Bengal 4x4
- Cutting Envelope: 4' x 4'
- Pump: Flow 7x 60hp
- Cutting Heads: Recently upgraded Dual P3 abrasive cutting heads
- Controller: Flow Controller using Flow cut 4.0 Year 2000
- Hours: 6100
- Info: 4,000 lb. Hopper & Chiller included
- Price: Call 330-677-9100 for pricing
|
(#214299)
|
Ingersoll Rand Waterjet
- Gantry: Ingersoll Rand Waterjet
- Cutting Envelope: 6' x 10'
- Hours: 2017
- Cutting Heads: One Jet Edge Permaline 3 Abrasive Cutting Head
- Controller: New Burny Phantom St touchscreen and servo drives installed 11/07.
- Info: Machine purchased used from WARDJet in 2003. Recycler manifolds (4 ea) installed. Manual Z axis. Belt driven ballscrews. Pump not included.
- Price: Call 330-677-9100 for pricing.
|
(#214279)
|
WARDJet Z813 Gantry
- Gantry: WARDJet 8' x 13' Z-Series
- Year of Manufacture: 2007
- Pump: 50 HP Intensifier Pump, 60,000 psi - OR Choose One of Our Many Used Pumps
- Cutting Heads: Two Abrasive Cutting Heads, Additional cutting heads available
- Controller: Burny LCD-10 Controller
- Software: IGEMS (optional)
- Price: Call 330-677-9100 for pricing
|
(#213979)
|
Seiko D-Tran Waterjet XM5106-13-N 1991
$31,000
|
(#213949)
|
Seiko D-Tran XM5064-12-N 1990
$8,500
|
(#213939)
|
Aerotech Waterjet and Controller
$33,000
|
Used Waterjet Cutting Pumps
(#214229)
|
Flow 50 HP - 40K PSI
$8,500
|
(#213909)
|
Ingersoll Rand SL3
$15,500
|
(#213919)
|
Ingersoll Rand SL3
$7,500
|
(#214209)
|
Flow 9XS 30 HP - 40K PSI
$12,000
|
(#214219)
|
Flow 9XS 40 HP - 40K PSI
$19,000
|
(#214039)
|
Flow 25 HP Intensifier Pump
$250
|
(#214089)
|
Flow 20X 50 HP Intensifier Pump
$800
|
Used Waterjet Accessories
(#214029)
|
Barton Abrasive Hopper 6.5 cu. ft.
$100
|
(#213999)
|
Abrasive Hopper 6.5 cu. ft.
$2,000
|
(#214059 & 214069)
|
Abrasive Hoppers
$350 each
|
(#214059 & 214069)
|
Abrasive Hoppers
|
Other CNC Equipment
(#214159)
|
Abrasive Hopper
$2,000
|
(#214119 & 214129)
|
Allen-Bradley Controller 9-Series
$3,000 each
|
(#214139)
|
Air Dryer
$1,500
|
(#214049)
|
Deionizer
$4,000
|
(#214149)
|
Morse 285A 55-gal Drum Handler
$450
|
(#214099)
|
Electric Motor
$350
|
(#214109)
|
Speedaire 5Z640B 2 Air Compressor
$2,000
|
(#214079)
|
Air Dryer
$1,000
|
(#213989)
|
Ingersoll Rand Air Compressor
$25,000
|
(#213929)
|
Zeks 150HSEA200 Air Dryer
$1,500
|
(#214229)
|
Seiko D-Tran XM5064-12-N 1990
$8,500
|
(#214019 & 214029)
|
Barton Abrasive Hoppers 6.5 cu. ft.
$200 each
|
(#213979)
|
Seiko D-Tran XM5106-13-N 1991
$15,000
|
(#213959)
|
Seiko D-Tran XM5064-13-N 1991
$8,500
|
(#213949)
|
Seiko D-Tran XM5064-12-N 1990
$8,500
|
(#213939)
|
Aerotech WJ #1 and control
$23,000
|
(#213909)
|
Seiko D-Tran XM5064-12-N 1990
$15,500
|
(#213959)
|
Seiko D-Tran XM5064-13-N 1991
$8,500
|
New Waterjet Equipment
(#214329)
|
WARDJet ZX-813 Gantry
- Gantry: WARDJet 8' x 13' Z-Series
- Year of Manufacture: 2010
- Pump: 50 HP Intensifier Pump, 60,000 psi - OR Choose One of Our Many Used Pumps
- Cutting Heads: Single Abrasive Cutting Head, Additional cutting heads available
- Controller: WARDJet X-Classic Controller
- Software: IGEMS
- Price: Call 330-677-9100 for pricing
|
(#214319)
|
WARDJet ZX-813 Gantry & 50 HP Pump
- Gantry: WARDJet 8' x 13' Z-Series
- Year of Manufacture: 2010
- Pump: 50 HP Intensifier Pump, 60,000 psi - OR Choose One of Our Many Used Pumps
- Cutting Heads: Single Abrasive Cutting Head, Additional cutting heads available
- Controller: WARDJet X-Classic Controller
- Software: IGEMS
- Price: Call 330-677-9100 for pricing.
|
Waterjets that appear below have been sold
(#213688)
|
Flow 35X 150HP Pump 55,000psi
SOLD - December '09
|
(#213859)
|
Calypso Shark 6' x 12'
SOLD - December '09
|
(#213677)
|
Ingersoll Rand 5'x10' Gantry & 50 HP Pump
SOLD - December '09
- Gantry: Ingersoll Rand 5´x10´ Gantry, Belt driven
- Year of Manufacture: 1996
- Pump: 50 HP Ingersoll Rand SL-IV Intensifier Pump 55,000 psi, 480 Volt
- Cutting Heads: One Jet Edge Abrasive Cutting Head
- Software: Smart Cam with workstation
- Misc: This unit can be inspected and operated. The current owner is available to speak with about the machine and is available to set up a meeting to see the machine.
|
(#213829)
|
Omax 80160 Waterjet
SOLD - December '09
- Gantry: Omax 80160
- Machine Footprint: 243" x 134"
- Cutting Envelope: 168" x 80"
- Year of Manufacture: 2005
- Serial Number: ES11580
- Hours: 2517
- Cutting Heads: One Abrasive Cutting Head
- Info: 2005 Omax Water Jet 80160 – Top of the line Omax Water Jet! The machine is maintained and used daily in granite and marble fabrication! This machine has Tilt head! Top of the line P4055V pump! Solids removal system included!
Click here for more photos
|
(#213849)
|
IR SL-I Intensifier Pump 50,000 PSI
SOLD - December '09
- 1.1 gpm
- Redundant top works
- The total hours on the unit are 27926.
- Recently overhauled. Rebuilt hydraulic pump, seals, new hydraulic cylinder, booster pump, heat exchanger 243 cutting hours ago
- Currently under power
- 460 V
|
(#213637)
|
Ingersoll Rand SL3 Intensifier Pump
SOLD - October '09
|
(#214259)
|
KMT S 30 HP Pump
SOLD - September '09
|
(#213689)
|
Jetedge 55-50B
SOLD - September '09
|
(#213819)
|
Calypso Hammerhead 3
SOLD - September '09
- Gantry: Calypso Hammerhead 6' x 12'
- Year of Manufacture: 2005
- Cutting Heads: 2 Abrasive Cutting Heads
- Controller: WARDJet XL Controller
- Software: IGEMS optional
- Misc: WARDJet Jobshop Grates™ Included
- Used pumps available
|
(#213809)
|
Used WARDJet Z-813 Gantry & 50 HP Pump
SOLD - July '09
- Gantry: WARDJet 8' x 13' Z-Series
- Year of Manufacture: 2006
- Pump: 50 HP Intensifier Pump, 60,000 psi
- Cutting Heads: 2 Independent Z-Carriages: One with Standard Cutting Head, Variable Speed Mini-Hopper and Laser Alignment Guide; One with Standard Cutting Head, Height Sensor, Variable Speed Mini-Hopper, and WARDJet Mini-Hopper
- Controller: WARDJet / Burny LCD 10
- Software: IGEMS
- Misc: This unit is our current floor model and has only been used for demonstration and testing purposes. The machine will be completely inspected and tested prior to shipment.
|
(#213326)
|
NEW RICHEL D-55 (5'x5') Gantry & 30 HP Pump
SOLD - June '09
- Gantry: RICHEL D-55 (5´ x 5´)
- Year of Manufacture: 2008
- Pump: 30 HP Intensifier Pump, 60,000 psi
- Cutting Heads: One Abrasive Cutting Head
- Controller: CNC Control
- Software: Included
- Misc: Under Power
|
(#213768)
|
Flow Bengal 1.0m x 0.5m & 25 HP Direct Drive Pump
SOLD - May '09
- Gantry: Flow Bengal 1m x 0.5m
- Pump: 25 HP Direct Drive Pump, 40,000 psi
- Cutting Heads: One Abrasive Cutting Head
- Software: Included
- Misc: Small Abrasive Bulk Feed Hopper
|
(#213799)
|
Calypso 5'x10' Gantry & Controller
SOLD - May '09
- Calypso 5'x10'
- 2000
- Not Included (Used pumps Available)
- One Abrasive Cutting Head
- Included
- Servo Motors on Each Axis
|
(#213789)
|
Calypso 4'x4' Gantry & Controller
SOLD - May '09
- Gantry: Calypso 4'x4'
- Year of Manufacture: 1996
- Pump: Not Included (Used pumps Available)
- Cutting Heads: One Abrasive Cutting Head
- Software: Included
- Misc: Stepper Motors on Each Axis
|
(#213657)
|
PAR Systems Vector 2½ Axis 4'x8' & 50HP Pump
SOLD - April '09
- Gantry: PAR Systems "Vector" 2½ Axis 4'x8'
- Material Table: 56" x 102"
- Effective Cutting Area: 48" x 96"
- Year of Manufacture: 1998
- Pump: 50 HP Ingersoll Rand Intensifier Pump
- Cutting Heads: One Abrasive Cutting Head
|
|
|
