Wsparcie wideo
IGEMS has added a „User” option to the Rotation Step pull-down menu in the nesting area. When the User option is selected, an additional box is displayed in which you can type the angles that you want to allow for rotation. The numbers you type in here should be separated by a space (e.g. 0 90 180). This can be helpful when nesting 5-axis parts that will be cut with the APEX 60 in order to avoid rotations that might cause rewinds or singularities.
This video will walk you through the first step in the WARDCAM process, including opening a file and an overview of the function of each of the buttons.
Learn how to replaces the seals in your Hypertherm or Accustream Waterjet Intensifier Pump.
An in-depth look at how to program work offsets using WARDCAM and our MOVE controller. Work Offsets are handy when you are cutting the same program numerous times in the same location.
5-Axis Bevel Cutting Head System
A compact and fully integrated 5-Axis solution, the Apex 60 allows for 5-Axis cuts up to 60° without a reduction in the 2D work area. By not compromising on quality, the Apex 60 is the most affordable 5-Axis cutting head on the market.
Utilizing over 25 years of research and development, the Apex 60 has been streamlined to put the latest innovations in 5-Axis cutting within reach – all without compromising on quality.
Extend your cutting capabilities. Get in touch today:
Skontaktuj się
Dołącz do naszej drużyny
Od Twojej idealnej pracy dzieli Cię jedno kliknięcie. Zapoznaj się z naszymi aktualnymi możliwościami tutaj.