A-Series

Motion Control. Reimagined.

Included standard with the A-Series, Move™ is hands down the simplest CNC software available today and features technology like drag-and-drop part loading and even part queueing.

A Sturdy, Industrial Grade Drive System

Avoid Drive Slippage and Stretching
The A-Series is driven by an industrial-grade rack and pinion drive system. This results in more accurate parts – period. By using non-pliable components, the system avoids the slipping, stretching, and thermal expansion pitfalls that are common with low-cost belt driven systems.

Cut More Parts for Less

Cut Material at the industry standard
The horsepower used in waterjet cutting plays a major role in the number of parts you can produce and how much each part will cost. Given a 4″ x 4″ mild steel part at 0.5″ thick, the A-Series simply outperforms the competition as an industrial-grade waterjet.

Built-In Water Level Control System

Super Quiet Waterjet Cutting
The A-Series is designed with an optional air compartment for controlling water level. Cutting underwater makes for quiet cutting – you may never want to cut above water again.

Most power per square foot of any machine in its class. The only machine in its class to offer a standard 60k pump.

The only machine in its class to offer a cutting enclosure for reduced splash and noise.

Most intuitive control design in the industry. Work Surface height at a comfortable height and easy to use with a MOVE touchscreen controller.

See the A-Series in Action

Built Around the Waterjet Process

A-0612

LENGTH 2’ (0.6m)

WIDTH 4’ (1.2m)

Z-TRAVEL 4” (0.10m)

A-1212

LENGTH 4’ (1.2m)

WIDTH 4’ (1.2m)

Z-TRAVEL 4” (0.10m)

Features & Benefits

Perfect for Prototyping

The A-Series can cut any material from titanium to carbon fiber to concrete. It does this all in a compact, enclosed footprint. This makes it very popular for laboratory settings where floorspace is limited and the environment needs to stay clean.

Abrasive Loading

Abrasive can be added to the integrated bulk feed hopper that is attached to the side of the machine. The integrated bulk feed hopper holds about 85 pounds of abrasive – which is enough for about 120 minutes of continuous cutting depending on orifice size and abrasive settings.