Pompes d'intensification Hypertherm Echion

Service simplifié

Les pompes Echion sont les premières pompes à jet d'eau à intégrer des joints à cartouche qui réduisent considérablement le temps nécessaire à la maintenance. Équipées de fonctionnalités standard telles que notre nouvelle évolution de la technologie Advanced Intensifier Technology™ (AIT) et du contrôle de pression proportionnel en boucle fermée, nos nouvelles pompes vous offrent une qualité de coupe constante tout en garantissant un fonctionnement et une fiabilité sans problème.

REDUCED MAINTENANCE TIME

Echion pumps include the next evolution of Hypertherm’s Advanced Intensifier Technology. This technology eliminates soft, static high-pressure seals and incorporates industry-leading cartridge seal design, enabling rapid replacement of common consumables.

Increased Performance

Standard on all Echion pumps, closed-loop proportional pressure control adjusts for ambient pressure and temperature, oil viscosity and hydraulic system wear parts, to deliver consistent quality at optimum cutting speeds.

Improved Reliability & Ease of Service

With 20% fewer parts than earlier generations, new Echion pumps include user-friendly features such as common service components located front and center, quick-connect fittings, and an easy access bleed-down valve, to make maintenance faster, easier, and less expensive.

Reduced Footprint

Smart industrial design, including fully integrated cooling, allows a reduced footprint, enabling integration into small, tight spaces.

THE NEXT EVOLUTION OF ADVANCED INTENSIFIER TECHNOLOGY SIMPLIFIES SYSTEM MAINTENANCE

Dites adieu aux réparations compliquées des joints. Les pompes Hypertherm Echion™ intègrent des joints à cartouche, permettant un remplacement rapide des consommables courants, entraînant une remise en service plus rapide. Ajoutez cela à d’autres fonctionnalités clés de l’AIT et il est facile de voir pourquoi Hypertherm est une force imparable dans le jet d’eau !

Download Echion Brochure

Télécharger maintenant

Imperial

Model	Max Ouput Flow	Max Orifice	Max Pressure	Configuration	Power	Bleed-Down Valve	Motor Starter
Echion 15	0.30 gpm	0.007"	60,000 psi	Single	15hp	Air	ATL
Echion 30	0.60 gpm	0.011"	60,000 psi	Single	30hp	Air	ATL/Wye-Delta/Soft Start
Echion 50	1.0 gpm	0.014"	60,000 psi	Single	50hp	Air	Wye-Delta/Soft Start

Metric

Model	Max Ouput Flow	Max Orifice	Max Pressure	Configuration	Power	Bleed-Down Valve	Motor Starter
Echion 15	1.10 lpm	0.18 mm	4137 bar	Single	11.2 kW	Air	ATL
Echion 30	2.30 lpm	0.28 mm	4137 bar	Single	22.4 kW	Air	ATL/Wye-Delta/Soft Start
Echion 50	3.80 lpm	0.35 mm	4137 bar	Single	37.3 kW	Air	Wye-Delta/Soft Start

Faites défiler pour voir tout le graphique


	Echion Series						Predictive Series						D-Series
	Echion 15		Echion 30		Echion 50		P-Series 50S		P-Series 60S		P-Series 75S		D-Series 100D		D-Series 150D
	50 Hz	60 Hz	50 Hz	60 Hz	50 Hz	60 Hz	50 Hz	60 Hz	50 Hz	60 Hz	50 Hz	60 Hz	50 Hz	60 Hz	50 Hz	60 Hz
Maximum output flow	0.30 gpm (1.1 lpm)		0.60 gpm (2.3 lpm)		1.0 gpm (3.8 lpm)		1.0 gpm (3.79 lpm)	1.1 gpm (4.16 lpm)	1.2 gpm (4.54 lpm)	1.3 gpm (4.92 lpm)	1.5 gpm (5.68 lpm)	1.6 gpm (6.06 lpm)	2.1 gpm (7.95 lpm)	2.2 gpm (8.33 lpm)	3.0 gpm (11.36 lpm)	3.2 gpm (12.11 lpm)
Maximum orifice	0.007″ (0.18 mm)		0.011″ (0.28 mm)		0.014″ (0.35 mm)		0.014″ (0.356 mm)	0.015″ (0.38 mm)	0.016″ (0.406 mm)		0.017″ (0.432 mm)	0.018″ (0.457 mm)	0.020″ (0.508 mm)	0.021″ (0.533 mm)	0.024″ (0.610 mm)	0.025″ (0.635 mm)
Continuous output pressure	Adjustable to 60,000 psi (4137 bar)
Intensifier configuration	Single						Single or Redundant		Single		Single or Redundant		Dual
Pressure control	Closed Loop Proportional												Electronic Proportional
Bleed-down valve	Air												Hydraulic

Motor Power	15hp (11.2 kW)		30hp (22.4 kW)		50hp (37.3 kW)		50hp (37.3 kW)		60hp (44.7 kW)		75hp (56 kW)		100hp (74.6 kW)		150hp (111.9 kW)
Voltage	400 V	208-230/460 V	400 V	208-230/460 V	400 V	208-230/460 V	400 V	208-230/460 V	400 V	460 V	400 V	460 V	400 V	460 V	400 V	460 V
Full load	23 A	45-41/21 A	44 A	83-75/38 A	73 A	135-122/61 A	73 A	138-125/62 A	75 A	71.1 A	103 A	87.1 A	138 A	117.5 A	204 A	173.4 A
Main breaker	30 A	60 / 30 A	50 A	200 / 50 A	100 A	175 / 100 A	80 A	150 / 80 A	100 A		125 A	100 A	150 A		225 A
Motor starter	ATL		Wye Delta/Soft Start	ATL / ATL/Soft Start	Wye-Delta/Soft Start		Soft Start						True Soft Start
Overall width	43″ (1090 mm)						40″ (1016 mm)						45″ (1143 mm)		55″ (1397 mm)
Overall length	53″ (1350 mm)						79″ (1996 mm)						86″ (2184 mm)		81″ (2057 mm)
Overall height	40″ (1010 mm)						59″ (1509 mm)						56″ (1422 mm)		56″ (1422 mm)
Approximate operating weight	1700 lb (775 kg)		1850 lb (825 kg)		2050 lb (925 kg)		2800 lb (1300 kg)		3200 lb (1450 kg)		3300 lb (1500 kg)		4150 lb (1882 kg)		6100 lb (2767 kg)
Additional Items
	Optional internal air-over-oil cooler						Optional external air-over-oil cooler						Optional external air-over-oil cooler
	Optional internal boost pump						Standard internal boost pump						Standard internal boost pump
	Optional metric conversion kit						Cover with viewing window						Optional water isolation valves		Standard water isolation valves
	–						Optional electrical interlock						–
Hydraulic Cooling Water (if not air cooled)
	Echion 15		Echion 30		Echion 50		HyPrecision P-Series 50S		HyPrecision P-Series 60S		HyPrecision P-Series 75S		HyPrecision 100D		HyPrecision 150D
	50 Hz	60 Hz	50 Hz	60 Hz	50 Hz	60 Hz	50 Hz	60 Hz	50 Hz	60 Hz	50 Hz	60 Hz	50 Hz	60 Hz	50 Hz	60 Hz
Normal Inlet Flow Rate	3 gpm (11.5 lpm)												8 gpm (30 lpm)		10 gpm (38 lpm)
Min. Inlet Water Pressure	40 psi (2.76 bar)
Max. Inlet Water Pressure	115 psi (7.93 bar)
Max. Inlet Temp.	70°F (21°C)
Min. Inlet Temp	40°F (4.4°C)

Combinaisons d'orifices prises en charge par les pompes HyPrecision

Orifice size	in (mm)
1 orifice	0.007 (0.18)
2 orifices	0.005 (0.13)
3 orifices	0.004 (0.10)
4 orifices	–
5 orifices	–
6 orifices	–

Orifice size	in (mm)
1 orifice	0.011 (0.28)
2 orifices	0.007 (0.18)
3 orifices	0.006 (0.15)
4 orifices	0.005 (0.13)
5 orifices	0.004 (0.10)
6 orifices	–

Orifice size	in (mm)
1 orifice	0.014 (0.35)
2 orifices	0.010 (0.25)
3 orifices	0.008 (0.20)
4 orifices	0.007 (0.18)
5 orifices	0.006 (0.15)
6 orifices	0.005 (0.13)

Combinaisons de buse et d'orifice

Orifice	Nozzle	Abrasive (lb/min)	Abrasive mesh
0.007	0.020	0.25	120 – 220
0.009	0.030	0.4 – .6	80 – 120
0.010	0.030	0.5 – .75	80 – 120
0.013	0.040	1.0 – 1.25	60 – 80
0.014	0.040	1.1 – 1.35	60 – 80
0.015	0.040	1.25 – 1.5	60 – 80
0.016	0.040	1.3 – 1.5	60 – 80

HP	Qty heads	Orifice/Nozzle
30	1	.010/.030
30	2	.006 water
50	1	.014/.040
50	2	.010/.030

Puissance vs débit pour les pompes à jet d'eau HyPrecision

Model	Power		Pressure		Max. output flow		Max. orifice size
	hp	kW	psi	bar	GPM	L/min	in	mm
15	15	11.2	60,000	4137	0.3	1.1	0.007	0.18
30	30	22	60,000	4137	0.60	2.30	0.011	0.28
50	50	37	60,000	4137	1.00	3.80	0.014	0.35

Entrer en contact

Joignez-vous à notre équipe

Nous sommes toujours à la recherche de personnes compétentes et passionnées par l'offre d'une expérience client exceptionnelle. Parlons!

Carrières

SYSTÈMES ABRASIFS À L'EAU

SYSTÈMES D'EAU SEULEMENT

JETS D'EAU PERSONNALISÉS