GCM

COMPLEX CUTTING MADE SIMPLE

COMPLEX CUTTING MADE SIMPLE

The GCM is one of the largest waterjets ever built by WARDJet, featuring both an Infini Winder 5-Axis head and a 5-Axis 24,000 RPM milling head for composite milling. The GCM has 5 feet of Z-Axis travel and is able to cut over the water table or over a part on the ground. The versatility this machine provides in terms of cutting and milling of composites is amazing. By combining both operations on a single, large-format system, operators can process composites without having to move the parts to a separate machine for milling. This helps to increase the accuracy of the parts as well as saving valuable time setting up a second machine.

Specs

Imperial Metric

Footprint

40.8' x 24.9'

12.45 m x 7.59 m

One Carriage X-Y Cutting Area

30' x 14.1'

9.14 m x 4.29 m

Two Carriage X-Y Cutting Area

30' x 14.1'

9.14 m x 4.29 m

Software

Ikuhlu, WARDCAM, IGEMS

Ikuhlu, WARDCAM, IGEMS

Power Requirements (Gantry Only)

230V, 30 amps, 3 Phase

230V, 30 amps, 3 Phase

Air Requirements

80 psi, 2 cfm

5.52 bar, 0.06 cmm

Max Number of Z-Carriages

4

4

Bulk Feed Hopper

2200 lb pressurized

2200 lb pressurized

Drive Mechanism

Helical rack and split pinion (X & Y). Ball screw driven Z.

Helical rack and split pinion (X & Y). Ball screw driven Z.

Linear Positional Accuracy

± 0.003" per axis

± 0.08 mm per axis

Repeatability

± 0.001" per axis

± 0.03 mm per axis

Speed

0.01 in/min - 500 in/min based on 230 volts

0.25 mm/min - 12700 mm/min based on 230 volts

Skontaktuj się

Dołącz do naszej drużyny

Od Twojej idealnej pracy dzieli Cię jedno kliknięcie. Zapoznaj się z naszymi aktualnymi możliwościami tutaj.

UCZ SIĘ WIĘCEJ